Great for creating layered wide-pocket toppers/valance treatments.  The combination bracket has three position locations.  Fingertip projection adjustment for ease of installation.

• Finish: White.
• Curtain Rod Projects: 2 1/2"
• Dauphine Rod Projects: 4" - 6"

Dauphine Flat Rods feature snap-on bracket design for an easy, one-person installation. 

• Projects: 4" to 6"
• Clearance: 3 1/2" to 5 1/2"
• Rod pocket required: 3" to 3 1/2" minimum.
• Finish: White
• Take-up: 3/8"
• Packaged: 1 rod with 2 End Brackets and 0 Center Supports.

This boxed set includes everything you need to install in a Bay Window.  Side Rods expand from 20" to 42" and the Center Rod expands from 38" to 64".

• Projection: 4" - 6"
• Clearance: 3 1/2" - 5 1/2"
• Packaged: 3 rods, 2 Bay-Bow brackets, 4 metal Center Supports and 2 Corner Hinges.

Bay or Bow Brackets allows the bracket to bow so that it sdoes not stick out into the room on Bay Window or slanted walll applications.

• Finish: White (1)
• Packaged: 1 pair per package
• IMPORTANT NOTE: These brackets will only work with rods ordered after September 15th, 2005. They will not work with rods that have the square hole in the front of the rod.

Center Support Bracket for Graber 2 1/2" Dauphine Rods used when you need to increase the standard clearance to between 6 1/4" and 8 1/2" from the wall.  These brackets are used with 4-728-01 End Brackets.

• Clearance: 6 1/4" - 8 1/2"
• Packaged: 1 per package
• Coordinating End Bracket: 4-728-01

Corner Hinge is used to connect two rods together and make a 90 degree turn.  Can be used on inside or outside corners.

• Finish: White
• Packaged: 1 per package
• IMPORTANT NOTE: These brackets will only work with rods ordered after September 15th, 2005. They will not work with rods that have the square hole in the front of the rod.

End Bracket for Graber 2 1/2" Dauphine Rods used when you need to decrease the standard clearance to between 2" and 3" from the wall.  These brackets are for an outside mount only.

• Clearance: 2" - 3"
• Packaged: 1 pair per package
• Important Note: These brackets will only work with 2 1/2" Dauphine rods ordered after September 15th, 2005 with the new top and bottom hole design. They will not work with 2 1/2" Dauphine rods with a square hole in the front of the rod (old style).

End Bracket for Graber 2 1/2" Dauphine Rods used when you need to replace the brackets originally boxed with the rod.

• Clearance: 3 1/2" - 5 1/2"
• Packaged: 1 pair per package
• Important Note: These brackets will only work with 2 1/2" Dauphine rods ordered after September 15th, 2005 with the new top and bottom hole design. They will not work with 2 1/2" Dauphine rods with a square hole in the front of the rod (old style).

End Bracket for Graber 2 1/2" Dauphine Rods used when you need to decrease the standard clearance to 3/4" from the wall.  These brackets are for an outside mount only.

• Clearance: 3/4"
• Packaged: 1 pair per package
• Important Note: These brackets will only work with 2 1/2" Dauphine rods ordered after September 15th, 2005 with the new top and bottom hole design. They will not work with 2 1/2" Dauphine rods with a square hole in the front of the rod (old style).

End Bracket for Graber 2 1/2" Dauphine Rods used when you need to increase the standard clearance to between 6 1/4" and 8 1/2" from the wall.  These brackets are for an outside mount only.

• Clearance: 6 1/4" - 8 1/2"
• Packaged: 1 pair per package
• Coordinating Center Support: 4-738-1
• Important Note: These brackets will only work with 2 1/2" Dauphine rods ordered after September 15th, 2005 with the new top and bottom hole design. They will not work with 2 1/2" Dauphine rods with a square hole in the front of the rod (old style).

Spring Tension Dauphine makes it easy to install inside mount wide pocket treatments. Snap-lock spring mechanism means that no brackets or tools are required.

• Finish: White