• Home
• About Us
• Drapery Hardware
• Order Status
• Search
• View Cart
• Contact Us

Graber's 9-666 Baton Draw Track System for Pinch Pleat Draperies is a Made to Measure system used when you need a track capable of holding 1.75 lbs. per foot of drapery fabric with a Baton Draw. Designed with rolling carriers these track sets can be continuously curved and are available in aluminum or white finishes. This set uses the 9-657 track series. Please note these are complete track sets made to your specific size and since they are custom made, they are not returnable.

Below you will see a list of the components that make up the track system. Some components are standard and no extra charge when ordering the 9-666 Made To Measure Track System and some components are available at an additional charge. Items are noted when they have a surcharge.  If you need individual components for an existing system, please click on a component item number below or Go Here for Complete Component Pricing.

Track: 9-657 Series

Rolling Carriers

9-388-0 Left Hand Underlap Baton Master for Two-Way or One-Way Left Draws	9-387-0 Right Hand Overlap Baton Master for Two-Way or One-Way Right Draws

9-384-1 Rolling Carrier unconnected with pendant (part of track set)	9-383-1 Rolling Carrier unconnected without pendant	9-345-1 Swivel Snap Pendant	9-396-0 Horseshoe clip for unconnected rolling carrier with pendant

9-385-0 Drapery Return Snap Plate	3-386-1 End Cap Assembly with Screw
9-379 Adjustable Wall Bracket	9-391 Ceiling Bracket
Batons 8-637-1 - 33" with clip 8-638-1 - 48" with clip 8-639-1 - 60" with clip	9-850-1 Splice for 9-657 Track

Major Components

Master Carriers

Rolling swivel carriers provide for smooth traversing even with heavy drapery loads.  Wheels are nylon and carriers are made of acetate.  Horseshoe clip is provided.  Carriers are made up of three individual parts.  They are included in a track set but can be ordered individually as replacement parts.

• Designed especially for Motels, Hotels, Dormitories and Commercial buildings.
• Anodized aluminum or baked white enamel track can be bent to any angle on a 12" radius and can be reverse bent with limitations, No continuous curves.
• Rolling Swivel Carriers have hard thermoplastic wheels for long life, smoothest traversing.
• Heavy duty steel master carrier arms adjust for best closure. Six hard thermoplastic wheels on each master carrier.
• Screw-in ceiling clips are available for ceiling mount (9-391).
• Wall Mount Brackets with 3.5"-4.25" projection available for wall mounting (9-379). 
• Aluminum Wall Thickness is 0.060".
• Maximum Finished Rod Length:
  • Two Way Draw - 32 Feet
  • One Way Draw - 16 Feet
• Weight Rating: 1.75 lbs. per foot of Rod Width
  • Example: 16 Foot One Way Draw can hold 28 lbs. of Drapery Fabric.
• Pleating System: Pinch Pleat
• Draws Available: Two Way, One Way Left or One Way Right.
•  Fullness:  100% unless otherwise specified.

Graber Super Duty Slimline Baton Draw Track for Pinch Pleat Draperies