• Home
• About Us
• Drapery Hardware
• Order Status
• Search
• View Cart
• Contact Us

Graber's 9-635 Cord Draw Track System for Pinch Pleat Draperies is a Made to Measure system used when you need a track capable of holding 2.5 lbs. per foot of drapery fabric.  Designed with rolling carriers these track sets can be continuously curved and are available in aluminum or white finishes.  This set uses the 9-650 track series.  Please note these are complete track sets made to your specific size and since they are custom made, they are not returnable.

Below you will see a list of the components that make up the track system.  Some components are standard and no extra charge when ordering the 9-635 Made To Measure Track System and some components are available at an additional charge.  Items are noted when they have a surcharge.  If you need individual components for an existing system, please click on a component item number below or Go Here for Complete Component Pricing.

Track: 9-650 Series

Rolling Carriers

9-354-0 Left Hand Underlap Master for Two-Way or One-Way Left Draws	9-355-0 Right Hand Overlap Master for Two-Way or One-Way Right Draws	9-356-0 Left Hand Butt Master with double snaps for Two-Way Draws	9-357-0 Right Butt Master with double snaps for Two-Way Draws

9-384-1 Rolling Carrier unconnected with pendant (part of track set)	9-383-1 Rolling Carrier unconnected without pendant	9-345-1 Swivel Snap Pendant	9-396-0 Horseshoe clip for unconnected rolling carrier with pendant

9-351-1 Left Hand Ball Bearing End Pulley set with drapery return plate	9-350-1 Right Hand Ball Bearing End Pulley set with drapery return plate
9-353-1 One-Way Draw Ball Bearing End Pulley	9-358-0 Track Splice
9-359 Adjustable Wall Bracket	9-360 Ceiling Bracket
8-648-1 Metal Ball Bearing Cord Tensioner 8-3/4" - 13" (by request)	8-658-1 Metal Ball Bearing Cord Tensioner 5-1/2" - 7-1/2" (Standard)

Major Components

Master Carriers

Rolling swivel carriers provide for smooth traversing even with heavy drapery loads.  Wheels are nylon and carriers are made of acetate.  Horseshoe clip is provided.  Carriers are made up of three individual parts.  They are included in a track set but can be ordered individually as replacement parts.

• Anodized aluminum or baked white enamel track can be bent to any angle greater than 90 degrees on a 12" radius.  Continuous curves are available but reverse curves are not due to the cord draw.
• Rolling Swivel Carriers have hard thermoplastic wheels for long life, smoothest traversing.
• Heavy duty steel master carrier arms adjust for best closure.  Six hard thermoplastic wheels on each master carrier.
• Screw-in ceiling clips are available for ceiling mount (9-360). Sold at an additional charge to the Track System.
• Wall Mount Brackets with 3.5"-4.5" Projection available for wall mounting (9-359). Separate cord channel with 7/8" Diameter Ball Bearing End Pulley Wheels.
• Aluminum Wall Thickness is 0.060".
• Maximum Finished Rod Length:
  • Two Way Draw - 48 Feet
  • One Way Draw - 24 Feet
• Weight Rating: 2.5 lbs. per foot of Rod Width
  • Example: 24 Foot One Way Draw can hold 60 lbs. of Drapery Fabric.
• Pleating System: Pinch Pleat Draws Available: Two Way, One Way Left or One Way Right. Fullness:  100% unless otherwise specified.

Graber Super Duty Slimline Cord Draw Track for Pinch Pleat Draperies