• Home
• About Us
• Drapery Hardware
• Order Status
• Search
• View Cart
• Contact Us

Graber's 9-994-0 Hand / Baton Draw Track system is one of the smoothest operating track system by Graber.  Designed with ball bearing carriers and installed thru holes in the track therefore no brackets are needed. This set uses the 9-808 track series.  Please note these are complete track sets made to your specific size and since they are custom made, they are not returnable.

Below you will see a list of the components that make up the track system.  Some components are standard and no extra charge when ordering the 9-994-0 Made To Measure Track System and some components are available at an additional charge.  Items are noted when they have a surcharge.

If you need individual components for an existing system, please click on a component item number below or Go Here for Complete Component Pricing.

Click Here To Price or Order a Contrack® 9-994-0 Made-to-Measure Hand/Baton Draw Track System.

Track: 9-808 Series

9-165-0 End Stop - Used to prevent Master Carriers or Ball Bearing Carriers from sliding out the end of the track.	9-170-0 Right Side Return Extender or 9-171-0 Left Side Return Extender - provides a way to install a drapery return on the end of the track since brackets are not on the ends like conventional rod brackets.
33" Fiberglass Baton with Clip - 8-637-1  48" Fiberglass Baton with Clip - 8-638-1 60" Fiberglass Baton with Clip - 8-639-1	9-857-0 Splice for 9-808 Track

Contrack® Major Components

Contrack® Carriers

Contrack® Master Carriers

9-840-1 Ball Bearing Carrier (Standard)

9-849-0 Ball Bearing Carrier with Hook - Sold at an additional charge to the Track System and will replace standard carriers on track.

• 9-821-0 Two Way Master (Available on Baton Draw)
  
  
  
  
  
  
  
  
  
  
• 9-822-0 One Way Master (Available on Baton Draw), Reversible

• Forward canted ball bearing carriers (9-840-1) provide erect headings and easy traversing. Standard carrier is without a hook, just insert drapery pin into carrier hole. Optional Carrier with Hook (9-849-0) available for draperies with sewn in grommets.

• Heavy Duty Hand or Baton Draw Cubicle Track.
• Forward canted ball bearing carriers provide erect headings and easy traversing.
• Standard Configuration is a Hand Draw Track, however, a Baton and Master Carrier is available for applications if so needed.
• Bending is available in 12" radius regular and reverse curves.  Ideal for ceiling mounted cubicle systems.  Can be continuous curved.
• Track is punched 16" on center for direct ceiling mount with screws.
• Aluminum Wall Thickness is 0.050".
• Available Finishes: Extruded  6063-T5 Anodized Satin-Finish Aluminum.  Aluminum Association Specification Number AA-C22A21
• Maximum Finished Rod Length:
  • Two Way Draw - 48 Feet
  • One Way Draw - 24 Feet
• Weight Rating: 5 lbs. per foot of Rod Width
  • Example: 24 Foot One Way Draw can hold 120 lbs. of Drapery Fabric.
• Pleating System: Pinch Pleat or Cubicle Curtains

Graber Contrack® 9-994-0 Hand/Baton Draw Track System