Blinds and Shades Main Page

Drapery Hardware Main Page

Show All Online Store Products

Browse Store by Department

The Bali S3000 provides state of the are performance in horizontal blinds.  Utilizing an advanced headrail system, the S3000 offers a number of refinements.  A light blocking lip at lower rear of headrail works in conjunction with the top slat to reduce light leakage when slats are closed.  Top loading hidden brackets that position the blind closer to the mounting surface and a curved headrail face similar to a slat that eliminates the need for a valance, allows a cleaner installation for improved aesthetics.  Optional box brackets with a curved face are available in key colors.  Lift cord rollers for easier lifting and lowering and clutch wand tilter are also standard features.

• Headrail with light blocking lip and curved headrail face - Eliminates light leakage at the headrail and provides a clean, finished look that blends with slats.
• Antistatic, antimicrobial paint finish - Easier to clean and reduces the static electricity that attracts dust.>
• Slats made of USA mfg. aluminum alloy - Meets all industry test requirements.
  
• Privacy Slat option - Cord holes are hidden for enhanced light control.
  
• 1" X 1-1/2" steel headrail - Extra heavy-duty strength allows widths up to 192" for 2 or 3 blinds on one headrail.
• 1" mini slat thickness options of standard 0.006" or optional 0.008" and braided ladder spacing options of standard 21.5 or option 20.0 mm - Allows freedom in writing specifications.
• Lift cord rollers - Smoother lifting and lowering.
• Contract options - Top lock cord locks, tilt limiters.
• Lifetime warranty - Dependable quality.

1. Headrail measures 1" high by 1-1/2" deep.  Headrail design to include rolled edges at top, light blocking lip at the lower back side and a curved headrail face similar to the crown of a 1" slat.  Headrail is phosphate-treated steel and is finished with a vinyl primer and topcoat of polyester-baked enamel and shall measure 0.025" thick.
2. Bottomrail is tubular shaped and is phosphate-treated steel with vinyl primer and a top coat of polyester-baked enamel and shall measure 0.025" thick.  S3000 bottomrail is fully enclosed.
3. Slats made of USA manufactured cold rolled aluminum alloy.  Slats are nominally 1" wide and available in standard 0.006" or optional 0.008" thickness.  Slats are finished with a polyester-baked enamel with a durable antistatic, antimicrobial paint finish.  a) Privacy Slat Option provides 18 mm ladder spacing and cord holes that are offset and hidden by slat overlap for enhanced light control when slats are tilted down.
4. Tilter is a worm and gear design in a fully enclosed housing.  Design incorporates a clutch mechanism to eliminate damage due to over tilting.
5. Cord Lock is a snap-in design with stainless steel wear guard and a floating locking pin and is crash proof.
6. Tiltrod is hexagonal-shaped electro-zinc coated solid steel, measuring 1/4" at its widest point.
7. Tiltrod Support is low friction thermoplastic and will support tiltrod.  Tiltrod support will position ladder drums and guide cords and ladders with-out abrasion.  Tiltrod support incorporates lift cord rollers for easier and smoother lifting and lowering operation.
8. Ladder Drums are low friction thermoplastic with smooth hole edges to position ladders.
9. Ladder is made of braided polyester yarn.  Ladder is available with standard 21.5 or optional 20 mm spacing between slats.
10. Lift cords made of braided polyester, measuring 1.4 mm in diameter.
11. Installation Brackets: Snap-in hidden brackets are made of zinc plated steel.  Brackets allow adequate space to accommodate power screwdriver for mounting.  The brackets facilitate easy installation and removal of headrail channel.  Additional brackets are supplied for blinds over 60".  Optional steel and support box brackets are available in a limited color offering.